BioStar 2 - How to set up an anti passback zone

BioStar 2 - How to set up an anti passback zone

This document will guide you how to configure Local Anti-Passback zone which is provided without license.

RS-485 Mode

Local zone means RS-485 based, master device is zone master. Please refer to the below link for RS-485 configuration. 
RS485 Mode (Master, Default, Slave) 

Door configuration

Go to Device tap, click Add Door and configure the door which you want to set up Anti-Passback zone.
 

Assign each Entry device and Exit device to the devices you have already added at the above step. (RS-485 Master and Slave devices)


Once you assigned Entry Device and Exit Device, Anti-Passback and Alarm menu will be added at the bottom.

    • Related Articles

    • BioStar 1 - How to set up an anti passback zone

      Anti-passback is a security mechanism that prevents a person from passing back her access card to the next person. It is designed to prevent the next person from verifying herself with another person's access card. When using BioStar, you can set up ...
    • BioStar 2 - Hoe stel ik een anti passback zone in

      Controleer uw BioStar SE licentie voordat u dit artikel leest. De BioStar 2 SE (Standard Edition) licentie moet geactiveerd zijn om de anti passback zone in te kunnen stellen. Zodra de licentie is geactiveerd dan is het tabblad 'zone' beschikbaar in ...
    • BioStar 2 - How to set up a fire alarm zone

      To use zone feature, you should activate BioStar2 AC license first. And then, you can use Biostar 2 zone. The concept of Biostar2 fire alarm zone is similar with BioStar version1 like below. Electrical specification If the electrical output of Fire ...
    • BioStar 1 - How to set up a fire alarm zone

      All the devices that are in a fire alarm zone will automatically open their doors when the fire alarm sets off. The alarm is detected through an input port set in the configuration of the zone. You can set up a fire alarm zone by performing the ...
    • BioStar 1 - How to set up an alarm zone

      BioStar allows you to set up an alarm zone where you can determine how doors in the zone behave when someone breaks into the zone.  You can set up a fire alarm zone by performing the following steps:  1. On the Doors page, click Add New Zone.    2. ...